MANHOLES

WHY HDPE MANHOLES?

HDPE Manholes is highly recommended over the traditional manholes made from concrete or bricks due to many advantages they hold including easy handling, shorter installation time, watertight fit and less maintenance. Moreover, they are highly resistant to sulphuric acid, a substance that is frequently found in sewers and is therefore highly recommended over the traditional manholes made from concrete or bricks.

ADVANTAGES

Product Line

HDPE Manhole

Manhole cross section thickness differs according to its size and depth

Inspection Chamber

Inspection Chamber cross section thickness differs according to its size and depth

Onsite Installation

Drops

Mark the drop opening according to the pipe diameter and the desired location

Filling and Compaction

The Manhole cover

Installation of Inlet and Outlet

The installation procedure is one of the strong points of the HDPE Manhole. The faster installation, reduced manpower requirements, light lifting gear and ease of connection to the sewage system are just some of the factors that contribute towards the installation cost up to 50%, compared to an equivalent solution with concrete manholes.

FREQUENTLY ASKED QUESTIONS

There is two type of Manhole

a. Open top
It consist of manhole body (HDPE Flat Base Structure Wall Profile Pipe) + HDPE

b. Neck top
It consist of Manhole body (HDPE Structure Wall Profile Pipe) + HDPE Flat base + HDPE flat top with a neck of HDPE Structure Wall Profile Pipe ID 600mm with standard height of 25cm (can be customized)

Both type component is connected together by HDPE Welding accord-ing to DVS2207

Every Manhole starting from Height 1.5 meter contain of HDPE Stairs & connected to the Man-hole body from inside by HDPE Welding according to DVS2207.

A trench is excavated to reach the design elevation of the Manhole bottom level. Place manhole on a stable base from concrete then putting a full impact backfilling.

A. HDPE Pipes, Corrugated pipes or Solid pipes can be welded by extrusion polyethylene Gun.

B. UPVC pipes can be connected with Rubber gasket.

C. Different types of pipes such as steel pipe can be connected welded in with HDPE Stub flange adaptor the manhole body with Steel flange.

Yes, it can be used with the availability of fixing the pump inside with full isolation for the pump base without penetrating the Manhole base.

As all of its components are only HDPE, so it has the same lifetime of Polyethylene & HDPE, with high chemical resistance.

GRP Manhole Cover

Tanks

+

Horizontal Tank

TYPE HORIZONTAL
Volume (m³) 7.510152025
Volume (liter) 750010000150002000025000
Diameter (mm) 15001500250025002500
Length (mm) 45006000400050006000
+

Vertical Tank

TYPE VERTICAL
Volume (m³) 135
Volume (liter) 100030005000
Diameter (mm) 100012001500
Length (mm) 150030003250

Septic Tank

FIELDS OF APPLICATION

Primary treatment of sewage in residential, commercial buildings where municipal sewage system is not available.

+

Septic Tank

CAPACITY (liters) Diameter (m) Height (m) Recommended Users
30001200325012-15 people
50001500325020-30 people
75001500450030-40 people
10,0001500600040-50 people
15,0002500400050-75 people
20,0002500500075-100 people
25,00025006000100-125 people